Quick Preview
| Model | Cummins QSL8.9 - C260 - 30 | ||
|---|---|---|---|
| Engine | Type | 6 Cylinder in - line, 4 stroke, Water cooling, Direct injection, Turbocharged, Electronically Controlled HPCR | |
| Rated Power | 194kW@2200rpm | ||
| Max.torque | 1200Nm@1500rpm | ||
| Transmission System | ZF electro - hydraulic controlled power shift single handle operation, automatic transmission | ||
| Traveling speed (at rated engine rpm)： | |||
| Gearshift | Forward speed | 6.1 | |
| 1st | 5.8 | 15 | |
| 2nd | 8.9 | 34.9 | |
| 3rd | 14.2 | ||
| 4th | 21.6 | ||
| 5th | 33.2 | ||
| 6th | 48.9 | ||
| Hydraulic System | System pressure | 23MPa | |
| Load sensing variable flow hydraulic system | |||
| Steering System | Max.turning range | left or right 45° | |
| Min.turning range | left or right 25° | ||
| Min.turning radius | 8600mm | ||
| System pressure | 16MPa | ||
| Axles | Front axle | Oscillation angle (total):±16° | |
| wheel lean angle | right or left 17° | ||
| Rear axle: full - floating rear axle with NO - SPIN differential | |||
| Tandem Drive | (Tandem oscillation) | 15°forward and reverse | |
| Final driving | Spiral bevel gear | ||
| Tandem drive | Chains | ||
| Brakes | Service brake | Dual circuit hydraulic brake system, disk brake | |
| Parking brake | Flexible shaft control actuated Operated Disc Brake | ||
| Moldboard | Dimensions | 4422mmx688mmx20mm | |
| Blade Range | Right | 715mm | |
| Left | 685mm | ||
| Max.shoulder reach outside rear tires(frame straight) | |||
| Right | 2230mm | ||
| Left | 1970mm | ||
| Max.lift above ground | 425mm | ||
| Max.grading depth | 470mm | ||
| Max.blade angle, right or left | 90° | ||
| Blade tip angle | 36° - 66° | ||
| Tire | Tire size | 20.5 - 25 - 16PR L - 2 | |
| Cabin | Vibration - absorbed humanistic cabin with adjustable steering wheel and seat、and streamline dashboard provide low noise、air conditioning、comfortable operation and wide eyeshot. | ||
| Oil Capacity | Fuel tank | 475L | |
| Transmission | 35L | ||
| Crank case | 23L | ||
| Rear axle | 35L | ||
| Tandem housing(each) | 50x2L | ||
| Hydraulic system | 100L | ||
| Optional Attachment | |||
| Front Blade | Blade width： | 2890mm | |
| Max.lift above ground | 450mm | ||
| Max.grading depth | 250mm | ||
| Ripper | No.of shanks | 3(max.5) | |
| Max.digging depth | 315mm | ||
| Max.lift above ground | 405mm | ||
| Max.digging width | 2000mm | ||
